Changing a brake light/rear indicator/reversing light bulb

Changing a brake light/rear indicator/reversing light bulb

Tools and parts required:

Philips screwdriver -  metal into plastic do not use power tools or use on lowest setting and go easy.

Bulb. Spares shelves in repair bay or any automotive supply store - Repco/Autobarn/ Bursons etc.

n.b. Ensure you're using the correct bulb. 12v for Canters. 24v for Fighters and Isuzus, NNR/FFR. Check info on the old bulb to ensure the correct match.

1. Remove brake light cover w/ screwdriver. (Pic 1)

2. Remove the malfunctioning bulb. Make sure you're removing the correct bulb. Use the cover as a guide if required. From the side of the truck to the centre it's:
   Indicator - Brake light - Reverse

3. Replace cover ensuring that the rubber seal is in place. (Pic 2)

4. Check the lights.